Foxeer Arrow V2 HS1190 Review

 

Inhaltsverzeichnis

Foxeer has finally launched the Arrow V2 on the market, which has installed a useful OSD. In addition, the camera uses the popular Sony Super Had II CCD sensor and has an integrated microphone. Below I would like to give an overview of the Foxeer Arrow V2 (HS1190) camera.

Foxeer Arrow V2 Foxeer Arrow V2 Foxeer Arrow V2 Foxeer Arrow V2 Foxeer Arrow V2 back

Source

You can order the Foxeer Arrow V2 at Banggood or SurveilZone.

 

Whats in the box

Foxeer Arrow V2 Box Foxeer Arrow V2 Box Foxeer Arrow V2 Box Foxeer Arrow V2 Box Content

  • 1× Arrow V2 (HS1190) camera
  • 1× metal bracket for mounting and screws
  • 1× OSD-control unit
  • 1× plastic mounting set
  • 1× 7 Pin silicon cable (VCC GND VIDEO AUDIO OSD GND VBAT)
  • 1× additional camera housing (center fixing)
  • 1× manual

 

Specifications

  • Manufacturer: Foxeer
  • Lens: 2,8 mm/2,5 mm
  • Model: HS1190
  • Weight (without mounting material): 14 g
  • Dimensions: 26 mm × 29 mm × 21 mm
  • Video mode: NTSC/PAL
  • Sensor: 1/3″ Sony Super Had II CCD IR Blocked/IR Sensitive
  • Housing color: black or orange
  • Resolution: 600 TVL color /650 TVL black/white
  • Power consumption: 60 mA
  • Input voltage: 5-35 V
  • Microphone: yes
  • WDR: D-WDR

Features

  • large input voltage range
  • integrated OSD (voltage / timer / pilot name)
  • integrated microphone
  • Voltage calibration via OSD
  • many mounting options

 

Camera / sensor

The Foxeer Arrow 2 has the same sensor as the RunCam Swift 2, the Sony Super Had II CCD sensor. This sensor has proved its worth in the field of FPVs and offers, among other things, a lot of configuration possibilities, so that the camera can be precisely set to its own needs.

Foxeer Arrow V2 Sony Super Had II CCD Sensor

Front of the Sony Super Had II CCD sensor. The microphone is located above the sensor. The sensor has not been glued, like on the Swift 2.

Foxeer Arrow V2 Sony Super Had II CCD Sensor

On the back is a 7-pin connector. Unfortunately, a separate 2-pin connector for the OSD-control unit was renounced (more on this later). I was admitted that in previous versions the two SMD components for the power supply of the camera (inscription 100/200) were destroyed after hard crashes, because they were too close to the edge of the board. This is the latest version (state December 2016). If I am going to have the problem with this version, I will report. Until then it is only a presumption.

Mounting

The camera can be mounted in many different ways, as you can see in the following photos.

Like at the RunCam Swift 2, the camera housing of the Arrow v2 uses only metal press-in threads.

Foxeer Arrow V2 Dimensions Foxeer Arrow V2 mountingFoxeer Arrow V2 mount Foxeer Arrow V2 plastic mount   Foxeer Arrow V2 lens mount Foxeer Arrow V2 lens mount Foxeer Arrow V2 mount  Foxeer Arrow V2 caseFoxeer Arrow V2 mounting

 

OSD-menu

The camera and the OSD can be configured via the control unit. Two cables lead to the control unit from the 7-pin adapter. They are connected to each other by a further plug. When the control unit is no longer used, a 33 mm cable dangles around the camera. The advantage of this is that you can connect the OSD control unit to the camera quickly and easily, even if the camera is very tightly installed in the frame. The disadvantage is that the additional cable has to be secured in order not to get into the propellers. The ideal solution would be if there were a 5-pin plug (Cam) and a 2-pin plug (OSD) instead of the 7-pin plug to connect the OSD socket separately. If they had then also added the 33mm adapter separately, it would be the perfect solution in my opinion.

Foxeer Arrow V2 OSD Foxeer Arrow V2 OSD Foxeer Arrow V2 OSD

The OSD menu is very similar to the RunCam Swift 2 menu. On the Foxeer Arrow V2, however, you cannot set a baseline, but the voltage can be precisely calibrated to 0.1 volts.
Pilot name, timer and voltage can be freely positioned as desired on the video image.

Foxeer Arrow V2 OSD

Video quality

The default settings of the Foxeer Arrow V2 appear a bit too bright to me. However, I haven’t flown it outside and cannot estimate how the performance of the default settings is in flight. The settings of the camera (Sony Super Had II CCD sensor) can be configured via the OSD.
I will expand this post as soon as I have DVR material available. 😉

Conclusion: Foxeer Arrow V2

As a direct competitor to the RunCam Swift 2, the Foxeer Arrow V2 does not need to hide. Foxeer has learned from the misfortune of the Arrow V1 and placed with this version a solid camera on the market. This was, by the way, the first camera with an integrated OSD. I cannot say anything about the crash resistance at the moment, but I will of course update this review by new insights.

Wenn dir dieser Artikel gefallen hat und du mich unterstützen möchtest, findest du hier ein paar Möglichkeiten. DANKE!
If you liked this article and would like to support me, here are a few options. THANK YOU!

3 Responses

  1. 6. Januar 2017

    […] Foxeer Arrow V2 HS1190 Review […]

  2. 7. Januar 2017

    […] microphone. Below I would like to give an overview of the Foxeer Arrow V2 (HS1190) camera. Click HERE for complete […]

  3. 30. Mai 2017

    […] OSD adds to the versatility of the camera. The only camera which offers the same features is the Foxeer Arrow V2 It remains to be seen how the camera performs during the flight test, but I think this camera will […]

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert

Diese Website verwendet Akismet, um Spam zu reduzieren. Erfahre mehr darüber, wie deine Kommentardaten verarbeitet werden.