FETtec KISS FC Flight Controller + DJI Air Unit Anschlussplan / Wiringplan

I created this high resolution connection plan for the FETtec KISS FC Flight Controller

This connection plan will be constantly updated.
Please always link to the original image (6614px × 4661px, right click -> save as) so that the latest version is always displayed.


Click the image to enlarge
If you are looking for more wiring plans, go here

Hardware used in this wiringplan

Created by Philipp Seidel
Credits: Icons by rdy_fpv , Albert K and Me 😉
Please support Alex for his work on the KISS Firmware: https://www.patreon.com/fedorcommander

Wenn dir dieser Artikel gefallen hat und du mich unterstützen möchtest, findest du hier ein paar Möglichkeiten. DANKE!
If you liked this article and would like to support me, here are a few options. THANK YOU!

6 Antworten

  1. Dawid sagt:

    Hi Phil, I just received Fettec Kiss FC + DJI Remote and Air Unit Combo and looked into manual and it says: ‚Supported Flight Control System: The DJI FPV Air Unit is only compatible with flight controllers that support Betaflight‘ Did you test or maybe you just know that it works with Kiss FC – like in the diagram? If it’s not I will probably just sell it before opening it. I should just look into manual before ordering it :/

  2. Yohalmo Coto sagt:

    Hello! Is there any way to connect osd to the dji airunit? Or at least show voltage on the goggles with a dji vtx. Thank you

  3. Krzysztof Iwicki sagt:

    Hi on this diagram is battery 4s but I undurstand that 6s for dji sys is possible, and only one things which I should add is capacitor?

    • Phil sagt:

      If you want to use 6S, you need an additional stepdown for the DJI Air Unit, because it only supports 17 Volts and 6S has over 25 Volts. 😉 Also use the recommended capacitor when using 6S.

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.

Diese Website verwendet Akismet, um Spam zu reduzieren. Erfahre mehr darüber, wie deine Kommentardaten verarbeitet werden.